Ver cesta (0 Producto) Mi cuentaMostrar lista de la compraIr a caja

Skin Tite

Platinum Silicone Appliance Material Skin Tite™ is a skin safe silicone used to adhere skin effect appliances directly to the skin and to create fast wounds, scars. Offers maximum control and stays precisely where you put it. Cured adhesive is strong and will bend/flex with body movement. Wounds and appliances will not come off until you remove them. An infinite variety of color effects are achieved using Silc Pig™ silicone pigments.

  • Skin Tite set / 150gr

    Skin Tite, pegamento de silicona. A+B=112 gr + 28 gr. ThiVex (espesante)

    11,60 EUR (precio sin 21% IVA .)

  • Skin Tite / 240gr

    Pegamento de silicona de platino. Se utiliza para pegar prótesis y para trabajar directamente sobre la piel (endurece en 5 minutos). Unidad 240 ml

    20,80 EUR (precio sin 21% IVA .)

  • Skin Tite / 1kg

    Pegamento de silicona de platino. Se utiliza para pegar prótesis y para trabajar directamente sobre la piel (endurece en 5 minutos). A+B = 1kg

    58,75 EUR (precio sin 21% IVA .)

Instructions

PREPARATION...
Important: Shake Derma-tac™ container well before using.

Preparation - Clean the skin with soap and water to remove any oils which may affect the bond of the Derma-tac™ adhesive. Allow skin to dry completely.

APPLICATION & REMOVAL...
Acclerating / Lowering Viscosity – Drying time can be reduced with NOVOCS Gloss Silicone Solvent. Adding 10% NOVOCS gloss by weight will lower viscosity and reduce dry time by about ½.
Application - Derma-tac™ adhesive can be applied using a cotton swab, non-latex makeup sponge or suitable makeup brush. Apply adhesive to the surface of the skin or appliance. When applying on areas of high stretch or movement, such as around the mouth, adhesive can be applied to both the skin and the appliance.
Important: Allow Derma-tac™ to evaporate completely. This adhesive will not work unless it has thoroughly dried. Once Derma-tac™ has dried, press the makeup appliance in place. Derma-tac™ is a pressure sensitive adhesive, the firmer you press, the better the adhesive bond.
Appliance Removal Using Derma-tac™ Remover - Apply Derma-tac™ Remover using a cotton swab, cotton ball or suitable makeup brush. Work the Derma-tac™ remover under the edges of the appliance and onto the skin. work the appliance away from the skin slowly, taking particular care around the eyes, nose and mouth.
Once the Derma-tac™ has been removed, the skin should be cleaned and moisturized using a cosmetic cleanser and moisturizer.

Ayuda para elegir

Todos nuestros productos enumerados por aplicaciones: "Lifecasting", Escultura, Moldes, Fundición, Maquillaje FX, Réplicas, Dientes y Kits de aprendizaje.

Información Contacto Tarifas de envío Proyectos Clientes Marcas Aplicaciones Branches

su ventanilla única para materiales de modelado en 3D